Raymar Telenetics MIU14.4L, User Manual

Page: 26 / 43

0049-0867-01X 2
nd
Generation MIU14.4L – USER’S GUIDE 6/22/2011
Rev. A Page 22 of 39
&R0
CTS tracks RTS (Async) or acts per V.25 (sync).
&R1 CTS is always active.
&S0
DSR is always active.
&S1 DSR acts per V.25.
&T0
Terminate any test in progress.
&T1 Initiate local analog loopback.
&T2 Returns ERROR result code.
&T3 Initiate local digital loopback.
&T4 Allow remote digital loopback.
&T5 Disallow remote digital loopback request.
&T6 Request an RDL without self-test.
&T7 Request an RDL with self-test.
&T8 Initiate local analog loop with self-test.
&V
Display current configurations.
&W0
Store the active profile in NVRAM profile 0.
&W1 Store the active profile in NVRAM profile 1.
&X0
Select internal timing for the transmit clock.
&X1 Select external timing for the transmit clock.
&X2 Select slave receive timing for the transmit clock.
&Y0
Recall stored profile 0 upon power up.
&Y1 Recall stored profile 1 upon power up.
&Zn=x
Store dial string x (to 35) to location n (0 to 3 depending upon modem model).
%E0
Disable line quality monitor and auto retrain.
%E1 Enable line quality monitor and auto retrain.
%E2 Enable line quality monitor and fallback/fall forward.
%L Return received line signal level.
%Q Report the line signal quality.
\D1
Enable Auto Dial via DTR off to on sequence *PE14400 only
\D0
Disable Auto Dial (default) *PE14400 only
\G0
Disable modem to modem flow control.
\G1 Enable modem to modem flow control.
\H0
Command Mode default
\H1 Lease Line Mode