0049-2702-XXX Alliance Series Modems – USER MANUAL
08/05/2010
Rev. A
Page 92 of 197
Passwords
•
Passwords and commands may be entered in capitals or lowercase letters. (However,
they will be stored and subsequently displayed as capitals.) Do not include numbers or
spaces.
•
For MPP without callback, / must be the first character in a phone cell; for MPP with
callback operation, a phone number must be listed first in a phone cell.
•
A phone number cannot be stored after / .
Commands
•
Only one command (
/A
,
/P
, or
/U
) can be stored in each phone cell.
•
Do not leave a space after a command.
•
When using the
/U
command, store /U and the specified text string only in cell 0. Do not
include spaces or dialing modifiers in the text string.
How to Use Password Commands
To Establish or Change the Administrative Password:
An administrative password is not required for security operation, but for greatest security, an
administrative password should be used. When implemented, the administrative password
controls access to the Hayes-compatible
&V
and
&Z
commands. These commands are required
to view or modify the modem’s security configuration (as explained in the following sections).
To establish or change an administrative password, enter
AT &Z1=/ASECURITY
but replace SECURITY with the password of your choice.
Notes:
The administrative password may only be stored in phone cell 1. The command line,
including
AT &Z1=
, cannot exceed 64 characters.
