Chapter
5
Installation
20
RAYLASE 3-Axis Subsystem AS-50 for Laser Beam Deflection
MN049 / v1.0.0
5.3
Adjust field sizes
The subsystem can be adjusted to different field sizes as follows. The field sizes that can be
set are listed in the data sheet. If you want to set a different field size, you must consult
RAYLASE for assistance.
5.3.1
Preparation
o
Load the correction file corresponding to the desired operating field size.
Make sure that you use the following identification code:
The following identification code is used for AXIALSCAN-50 type subsystems:
Type
AS-50 AXIALSCAN-5ß
│
│
Aperture [mm]
│ │
│ │
Coating code Wavelength [nm] .............. Laser
│ │ Y 1064 ......................... Nd:YAG
│ │ C 10600 ........................ CO2
│ │ │
│ │ │
Field size range (min.-max.)
│ │ │ │
│ │ │ │
Type
│ │ │ │ st standard
│ │ │ │ │
│ │ │ │ │
Operating field size
└─ └─ └─ └────────└── └
XX-XX-XX_XXXX-XXXXxxx_XXXX.gcd
o
Create all electrical connections for the power supply and for control of the subsystem
(
page 12, Subsystem).
o
For details of connecting the deflection unit to a RAYLASE control card and operation with
RAYLASE software, refer to the corresponding manuals.
