Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
45
6.2 Emission external control mode set by power communication in ON mode
Figure 26 wiring diagram of Emission external control mode set by power communication in ON mode.
Operation methods
：
1. Turn the knob switch of the rear panel to ON;
2. Turn the key switch to ON;
3. Open the computer software;
4. Click the red light ON button to view the red light;
5. Turn off AD mode and turn on external control mode
（
This mode can be memorized after
power failure)
6. Click main power ON button;
7. Wait for Ready;
8.Setting the light power percentage;
9. Mod signal outputs high level to turn on the laser;
