Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000XZ
5
2.4 Operation Environment
The operation conditions are listed as the following table:
Table 1: The Operation Environment for the Laser
Model
C20000XZ
Supply voltage (V)
Three-phase four-wire system AC 323V~AC 437V
、
50/60Hz (including PE)
Power supply capacity
(kVA)
＞
85
Water cooling flow
(L/min)
＞
167(TOP flow
＞
75
，
BOTTOM flow
＞
92)
Installation
Environment
Flat, no vibration nor impact
Ambient Temperature
10
℃～
40
℃
Relative Humidity
＜
70%
a) Make sure the product is properly grounded before use.
b) The laser output head is connected with fiber optic cable. Please inspect the output head
carefully for dust or other contaminations. Use appropriate lens paper to clean it if necessary.
c) Failure to follow the instructions when operating the laser may cause malfunction and damage.
d) It is not allowed to install the output head when the laser is in operation.
e) Do not look directly into the output head. Always wear appropriate protective eyeglasses when
operating the laser.
Tips: Install the laser in an air-conditioned environment for longer life and better performance.
2.5 Attentions
a) Make sure that the correct voltage of 380VAC is used. Power supply connection failures will
damage the device.
b) The output laser is collimated by the collimating lens, it is important to keep the collimating
lens clean, otherwise it will damage the device.
