Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-A6000D~10000D
45
6.6 REM mode power communication set out light external control
Figure 25 Wiring diagram of setting power communication as emission external control on REM mode.
operation methods
：
a) The rear panel air switch hits ON to supply power to the laser.
b) Front panel key switch to REM, the laser into REM mode;
c) Shorting pin 8 and pin 9 on XP2 to supply power to the main control board.
d) XP1-A1 is connected to 24V.
e) XP1-A5 is connected to 24V to turn on the red light; XP1-A5 is connected to 0V to turn off
the red light after checking the optics.
