Raychem-AR-H58490-910QuickStart-EN-1805
nVent.com
|
1
910 QUICK START GUIDE
AC alarm output
L1/Line in
L2/Neutral in
L1/Line out to heating cable
L2/Neutral out to heating cable
Communications
interface
type label
(optional)
Keypad
RTD, communications,
inhibit/override input,
alarm dry contact output
Communications status
indicators
Alarm status indicator
Output status indicator
HTCBus
communications address
FOUR MODES OF OPERATION
SCAN
Default mode displayed during normal operation. The console sequentially displays load current, temperature, and setpoint readings.
ALARM
Examine or reset any alarms that may exist. The LED above the
ALARM
key is illuminated while in this mode.
MONITOR
Examine any of the controller readings such as temperature, load current, etc. The LED above the
MONITOR
key
is illuminated while in this mode.
CONFIGURE
Access the console menus to examine or alter the settings. The LED above the
CONFIG
key is illuminated while in this mode.
ENTER
BACK
TEST
SHIFT
ALARM
CONFIG
MONITOR
ENTER
BACK
TEST
SHIFT
ALARM
MONITOR
CONFIG
Press [SHIFT]
Press [TEST]
ENTER
BACK
TEST
SHIFT
ALARM
CONFIG
MONITOR
ENTER
SHIFT
CONFIG
Press [SHIFT]
Press [BACK]
BACK
TEST
ALARM
MONITOR
ENTER
BACK
MONITOR
CONFIG
ENTER
BACK
TEST
SHIFT
ALARM
CONFIG
MONITOR
SHIFT
Press [SHIFT]
Press [ENTER]
TEST
ALARM
Reference the manual for complete installation instructions.