Rayburn Ranger, User'S Manual & Installation Instructions

Page: 35 / 40

31
SECURE THE MAINS CABLE USING THE ‘P’ CLIPS FOR LEFT OR RIGHT HAND CABLE MANAGMENT.
17. Installation and Levelling
1. NOTE : Care must be taken not to trap mains cables ( Fig.
17.1 ).
2.
When removing appliance from the pallet, the front
stability feet can be raised with a spanner to allow
appliance to be slid from transit pallet (
Fig. 17.2
).
3. Slide cooker off transit pallet.
4.
Appliance can now be pushed back on its wheels into
desired position.
NOTE
: Care must be taken not to trap
mains cable.
5. Levelling of appliance - Use 12mm socket to adjust
wheel mechanism for FINE adjustment on both sides at
rear of the appliance ( Fig. 17.3 ).
6.
Using a 13mm open end spanner, feet can be adjusted
at front to make
FINE
adjustments to the front of the
appliance and to provide a brake for the wheels (
Fig.
17.3
).
7. Turning the bolt clockwise will lower the wheel thus
increasing height of the cooker ( Fig. 17.3 ).
8.
Anti-clockwise lifts the wheels and lowers the cooker
(
Fig. 17.3
).
9. Fit the magnetic plinth ( Fig. 17.4 ) and sides.
DESN 517951
Fig. 17.1
Fig. 17.2
SECURE THE MAINS CABLE USING THE ‘P’ CLIPS FOR LEFT OR RIGHT HAND CABLE MANAGMENT.
STABILITY FOOT
USE A 12MM OPEN END SPANNER
TO MAKE FINE ADJUSTMENT.
MAKE SURE THE SIDE PLINTH
SKIRTS LOCATE IN THE
GUIDE SLOTS PROVIDED
FRONT PLINTH COVER
FITS OVER SIDE SKIRTS
DESN 516895
DESN 517949
Fig. 17.3
Fig. 17.4
FRONT PLINTH COVER
FITS OVER SIDE SKIRTS
MAKE SURE SIDE PLINTH
SKIRTS LOCATE IN THE GUIDE
SLOTS BRACKET
DESN 517647