Now fit Part 3 the 50 mm x Rope Seal
around the ceramic block to seal the
air. It should project up the front edges
as in photo. Ensure that it is pressed
tightly into position
Then take part No.4 the blanket with a
large hole in the centre and fit into
position as in photo. The 2 equal
side face the oven and outer wall of
the cooker. see photo. Then press
the blanket outwards to fill all the
gaps but try and keep the hole equal
around the blast tube. The hole size
can be larger to take up the fitting
Position the rear insulation pad No. 5 in
position as shown in photo and press in
tightly coming down onto pad No.4
sealing the back.
Now fit the side pad No. 6 as shown and
again press tightly into position. Making
sure the rear and the front corners are
sealed.
Now fit the front pad No. 7 as shown
and again press tightly into position
forcing it into the corners.
The finished item should appear as
shown.
