SEE FIG. 39
Follow instructions in section BURNER ACCESS, Steps 1
to 3 and BURNER REMOVAL, Steps 1 to 5.
1.
Isolate fuel supply.
2.
Disconnect flexible hose. (This must be replaced
every 2 years).
3.
Remove solenoid plug.
4.
Remove feed pipe.
5.
Slacken three securing screws and remove pump.
6.
Check drive, replace if worn or damaged.
7.
Replace pump, reassemble in reverse order.
Replacement of parts (Burner)
PUMP ACCESS
FIG. 39
DESN 511995
PUMP
DRIVE
PUMP FIXING
SCREWS (3)
19
