5
ASSEMBLY INSTRUCTIONS
REQUIRED TOOL:
• Wrench
INSTALLING SKI RACK
1.
Place the floor panel (A) flat on the ground. Then, connect the bottom parts of the
two (2) support legs (B) to the floor panel. Insert four (4) bolts into the aligned holes
on the two (2) bottom holes on each of the support legs and tighten them using
your wrench. Once the support legs are connected, place the support legs on the
ground (revealing the underside of the legs). Then, insert and screw in the four (4)
adjustable feet pads (H).
2.
Keep the support legs (B) on the ground where you can see the underside of the floor
panel (A). Align the holes of the floor panel with the holes at the end of the vertical
rack leg (C). Insert the bolt and tighten it. Do the same for the five (5) other vertical
rack legs.
A
B
B
H
