April 26, 2006
The Fast and the Furious Super Bikes • Copyright 2006 • Raw Thrills Inc • All rights reserved
.
Basic Display Adjustments
The following are display settings, which you should become familiar with. It is important to note that settings may
differ slightly between manufacturers and even between displays of the same manufacturers. Certain factors like
age of the display could also be a factor. Therefore, the information below should only serve as a reference as
actual settings may not be practical in most cases.
Setting
Adjustment
Brightness
Function:
Background Brightness or Black Level.
Set Level:
Black background should appear dark and not gray.
Contrast
Function:
Definition/ Sharpness of character against background.
Set Level:
Outer edges of character or text should not be distorted.
H-Position
Function:
Horizontal Position. Side/side centering.
Set Level:
Picture should be centered from side to side.
H-Size
Function:
Horizontal Size. Side/side dimension.
Set Level:
Picture should be full from side to side.
V-Position
Function:
Vertical Position. Up/down centering.
Set Level:
Picture should be centered up and down.
V-Size
Function:
Vertical Size. Up/down dimension.
Set Level:
Picture should be full from top to bottom.
Pin Cushion
Function:
Degree of straightness along both vertical sides of the picture.
Set Level:
Both sides of the picture should be straight, without curvature.
Degauss
Function:
De-magnetizes the picture tube when activated. This eliminates
picture discoloration caused by magnetic disturbance around the picture tube.
Digital displays are adjusted using a button type remote adjust board. Below are functional diagrams for Neotec
and Wells Gardner 27” digital displays:
Neotec Remote
EXIT
MENU
SEL(+)
SEL(-)
LED
Menu:
Sel(-):
Sel(+):
Exit:
Open display adjustment menu.
Move down.
Move up.
Save changes and exit.
Wells-Gardner Remote
MODE
UP
SELECT
DOWN
Down:
Up:
Select:
Mode:
Move down.
Move up.
Choose setting to adjust.
Exit to adjustment menu.
WARNING:
Extremely high voltage is present on the monitor assembly. The monitor does not contain any
user serviceable parts. Do not attempt to service the monitor.
40
