King Kong of Skull Island
™
11 |
P a g e
4.
Make sure the brackets are mated properly and install two bottom 6MM x 20MM VESA mount
screws and washers (
fig. c
items A,
below) in the lower back mounting brackets and then install
remaining six 1/4-20 x 3/4' perimeter screws and washers (
fig. c
items B,
below).
5.
Install the three-piece graphic bezel to the flanges on the monitor bracket, along with the two
mending plates, using the #10-32 x 1/2" screws provided (
fig. d
below).
6.
Hook up the AC and DVI cord connections and secure to the wire looms provided (
fig. d
item A,
below).
fig. c
fig. d
7.
Install back monitor cover panel with eight 1/4-
20 x 3/4” screws and flat washers after AC and DVI
cables are connected (
fig. e,
below).
fig. e
