360°
Swivel the holder as desired and fix
it by the stabilizing nut.
OPEN
Green Chip: 9V
(Quick Charge,
Recommended)
White Chip: 5V
Using the Wireless Charging Car Holder
1. Connect the Micro USB cable into the charging port.
2. Insert the USB connector into the car charger. The LED indicator will
turn on blue indicating a successful connection.
OPEN
1. Wipe clean the surface before installation.
2. Place the base onto the cleaned spot.
3. Press the base tight and rotate the suction cup lock counterclockwise to
lock in place.
4. Rotate the lock clockwise and pull the suction cup release tab to
remove it.
OPEN
OPEN
Use the Arm Extension Button and Angle Adjuster to change the height
and angle of the mount.
OPEN
For Clip Mount
1. Pinch and press the clip release
tab and the ball joint to open the
clip.
2. Insert the two sides of the clip into
the car vent outlet, and release the
clip release tab.
3. To remove it, just pinch and press
the tab and take the mount out.
02/03
