M7 GX Quick Start Guide
10
Raveon Technologies
ATSL
Serial Number
– Reads and returns a
unique serial number for thjs unit.
Read Only
1 - 999999999
unique
SHOW
Show
–
Display the configuration of the
modem. This will return a page of ASCII
characters, showing the main
configuration parameters.
none
None
ATST
Statistics
–
Show the unit’s operational
statistics. See Statistics section of user
manual.
0, 1,2, 3, 4, or
5
None
ATVR
Firmware Version
– Returns firmware
version currently loaded on the module.
Read Only, 3
characters
none
PING
Ping another modem.
Format is PING
xxxx, where xxxx is the ID of the modem
to ping. If remote access is enabled on
xxxx, it will respond.
XXXX
-
GPS Additional Commands
The following commands are unique to the
–
GX
version of
the
M7
.
Command
Command Description
Param
eters
Default
GX
Display GPS settings.
Show an
overview of the current GPS features
and configurations in the M7 GX.
-
-
GPS
GPS Operation Mode.
Read/Set the
GX version’s Operating mode.
0 - 6
1
GPS&F
Reset all GPS (-GX version)
parameters.
Set the GX version’s
Operating mode to GPS mode 4, and
sets all GPS parameters to factory
defaults. It does not erase frequency
or other radio-related parameters.
-
-
IDLERATE
IDLE TX Interval.
Set the number of
seconds between position
transmissions when the unit is idle
(has not moved more than TRIGDX
meters).
0-9999
seconds
10
KEYPHRASE
Privacy Security Key Code.
Set the
privacy key for this device. It must be
the same key as used on all other
Raveon products in your system. It
secures radio transmissions from
unauthorized reception. Set it to 0 to
disable security encryption of data.
2-16
ASCII
character
s.
“RAVEON”
PREFIX
ID Prefix.
Set an ID prefix. The prefix
is 1-8 characters that will be put in
front of the ID when reporting an ID as
a waypoint name. A dash means no
1-8 ASCII
characters
Set it to “0”
for no
prefix.
V
