Ravenheat Energycatcher, Safety Instructions & Symbols Manual

Page: 11 / 22

Supplied By www.heating spares.co Tel. 0161 620 6677
11
6.4
Locate the 4 boiler/Energycatcher fi xing bolts and
nuts into the upper studs of the secured backframe,
leave them slightly loose of the frame.
Fig. 4
6.5.1
You may wish to run cold feed/preheat pipes into the
backframe.
It is best to use 15 mm plastic pipe as this should
bend when located in plastic clips, otherwise put
offset bends on feed pipes.