Raven Unverferth NutriMax Series, Installation & Operation Manual

Page: 9 / 44

CHAPTER
2
P/N 016-4001-133 Rev. B 5
CHAPTER 2
INTRODUCTION
Congratulations on your purchase of the Steerable Hitch system! The Steerable Hitch system is designed to
actively steer the implement’s hitch in response to various driving conditions such as speed, turning rate, and field
terrain.
PREPARING FOR INSTALLATION
Before installing the Steerable Hitch system, park the machine where the ground is level, clean, and dry. Bleed
pressure from the hydraulic system and leave the machine turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
RECOMMENDATIONS
Raven Industries recommends the following best practices when installing or operating the Steerable Hitch system
for the first time, at the start of the season, or when moving the Steerable Hitch system to another machine:
• Ensure the machine’s hydraulic filters have been recently changed and there are no issues with the machine’s
hydraulic system (e.g., pump issues, faulty hydraulic motors, fine metal deposits in the hydraulic hoses, etc.).
• Ensure the machine’s hydraulic valve is using fresh oil and debris is flushed from the hydraulic hoses, valves,
and filters.
Raven Industries recommends the following best practices when installing the Steerable Hitch system:
• Use part numbers to identify the parts.
• Do not remove the plastic wrap from a part until it is necessary for installation.
• Do not remove plastic caps from a part until it is necessary for installation.
POINT OF REFERENCE
The instructions in this manual assume that you are standing behind the machine, looking toward the cab.
TOOLS NEEDED
The following tools are recommended for installation of the Steerable Hitch system:
• SAE standard-sized wrenches
• Cable ties
• Side cutters