Raven SmarTrax Case IH MX 210, Installation Manual

Page: 16 / 40

Chapter 4
12 CaseIH MX 210, 230, 255, and 285 SmarTrax Installation Manual
Install the Pressure, Tank, Left, and Right
Hoses
1.
Locate the steering orbitrol underneath the front of the cab.
2.
Using an STC fitting removal tool or flat screwdriver, disconnect the original pressure, tank, left, and right
lines from the steering orbitrol.
Note:
When disconnecting the hoses from the machine, label the hoses in order to avoid any confusion
when reconnecting the hoses.
FIGURE 1.
Machine’s Steering Orbitrol
NOTICE
This machine is equipped with Aeroquip STC®
fittings which require two STC Quick release
tools in order to remove the hydraulic fittings.A
flat screwdriver may also be used to remove
fittings, but may make removal difficult. These
tools can be purchased from Aeroquip or Raven
Industries.
Release Tool Aeroquip P/N Raven P/N
STC-06 FF90213-06 333-0012-152
STC-08
FF90213-08 333-0012-153