8 © 2010 Newton Crouch Inc. This information is the property of Newton Crouch Inc. and is loaned confidentially for the sole use of our customer. It must not be
used in any way detrimental to our interest or shared with outside parties. Technical Tips/Raven—SCS 660 Programming Instructions revised
Rev 2.27.18
Press
ENTER
key.
0 (zero) goes to E
Enter the boom (swath) width in inches.
In the photo, 720 inches = 60 ft swath
Press
ENTER
key.
Use the arrow keys▲▼ to advance
boom 1 and boom 2.
Press
ENTER
key,
number, Press
ENTER
key
If a boom is not being used, enter a number
OTHER THAN 0 (ZERO) for boom length
Press the
SPEED CAL
button (#4)
SPEED CAL
E appears in the display.
Enter the correct speed for the type of sensor
used.
Press
ENTER
Key, number, Press
ENTER
Key.
5B
5C
6
Press the
METER CAL
button (#5)
Press
ENTER
key, number, Press
ENTER
key.
Press
Meter Cal (#5)
Press & hold the
METER CAL
button
When the display changes to
SPREADER CONSTANT 0
enter the Spreader Constant.
(no decimal place allowed)
Press
ENTER
key, number, Press
ENTER
key.
7
7A
Product Density in pounds per cubic foot.
Be Aware!
The console puts a decimal
place into this number. If you are entering
65 pounds, you must enter 6—5—0 to get
the number 65.0
