11 © 2010 Newton Crouch Inc. This information is the property of Newton Crouch Inc. and is loaned confidentially for the sole use of our customer. It must not be
used in any way detrimental to our interest or shared with outside parties. Technical Tips/Raven—SCS 660 Programming Instructions revised
Rev 2.27.18
Test Slot Sensor
1.
Have unit setup complete
2. Turn on 660
3. Press Volume Per Minute
4. See a rate
5. In manual, use INC/DEC to see change
2
3
5
View FAN RPM’s
1.
Have unit setup complete
2. Turn on 660
3. Press Data Menu
4. Press “1 Up Arrow” until you see
RATE 0 FAN RPM 0
5.
Use correct procedure to run spreader.
3
4
Run Conveyor While Stationary
1.
Have unit setup complete
2. Flip switch to MAN
3. Turn Master Switch ON
4. Press INC switch until chain turns on
3
2
4