d. Password: the password that has been registered with the FTP server for
the machine (optional).
e. Retype Password: retype the password that has been registered with the
FTP server for the machine.
f. Store Directory: destination folder where your document will be stored on
the FTP server. Make sure you enter a forward slash before the directory
path /. ex: /documents/contracts (optional).
g. Passive Mode Toggle: OFF or ON depending on your FTP server and
network firewall configuration (by default, this setting is ON).
h. Port Number: port number used to access the FTP server.
5. Click TEST CONNECTION to verify connection to your FTP server.
6. If failure, please correct fields with error messaging.
7. If success, press SAVE to finalize your changes.
Scanning and Sending to Multiple Destinations
1. Load the stack of documents with the top of the pages pointing into the feeder.
2. Verify that the paper guides are aligned with the edges of the stack by sliding the
paper feed guides in the automatic feeder tray.
3. Select the “Destination” option on the home screen and choose your destinations
by tapping the destination rows individually until you have selected all
destinations where you would like to send your document, then choose “Save”.
Saving Contacts
1. From the main home screen, press the gear in the top right corner.
2. Select “Contacts”
3. Select “Add Contact”
4. Input the contact name
5. Input the contact email address and/or fax number
6. Select “Save”
7. Select the saved contact from the email or fax destination screen
Using As A TWAIN Scanner With a Computer
To use your Raven Scanner Original 2nd Generation as a regular scanner, you must first
install Raven Destop onto your computer. After installation of Raven Desktop is
completed, this scanner allows you to scan via a Raven Desktop from your computer.
To ensure your computer can identify the USB scanner, please install the scanner driver
first before connecting the scanner to your computer.
22
[email protected] | 1-800-713-9009 | raven.com/support
