Raven MTi User Manual Download Page 85

Page: 85 / 121

RAVEN CUBASE/NUENDO BASIC LAYOUT USER MANUAL |

TOGGLE GRID VALUE

Press

TOGGLE GRID VALUE

to scroll through all the different grid sizes.

RANGE TOOL

Press

RANGE TOOL

to activate the range/selection tool.

SPLIT AT RANGE

Press

SPLIT AT RANGE

to split the select region at the range selection.

CROP AT RANGE

Press

CROP AT RANGE

to crop the select region at the range selection by trimming the start and end of the region to

the selection.

SPLIT AT CURSOR

Press

SPLIT AT CURSOR

to split the select region at the cursor location.

SNAP EVENTS

Press

SNAP EVENTS

to change the timeline/grid snap to free hand to allow movement of the event to anywhere on

the timeline.

SNAP GRID

Press

SNAP GRID

to change the timeline/grid snap to grid mode to force any event movement to stay on the grid.

Summary of Contents for MTi


























































































































Search results

Summary of Contents for MTi

Reviews:

Related manuals for MTi

Brands by name

Popular brands

Raven MTi, User Manual

Search results

Summary of Contents for MTi

Reviews:

Related manuals for MTi

Brands by name

Popular brands