Cab Component Installation:
13
CAB COMPONENT INSTALLATION
FIGURE 11. TRANSDUCER and VALVE Connections
3. Connect the TRANSDUCER connector to the pressure transducer installed in Port PS of the valve.
4. Connect the VALVE connector to the open 4-pin Deutsch port on the PVES valve.
FIGURE 12. WAS Connection
5. Route the WAS connectors of the valve harness toward the front axle.
6. Disconnect the machine existing WAS connection.
7. Install the WAS connectors of the valve harness between the machine WAS connectors.
8. Use plastic cable ties to secure any excess cable away from moving parts and heat sources.
TRANSDUCER
Connection
(Transducer Not
Visible)
VALVE
Connection
