CHAPTER 3
12
TC1/HDU Installation Manual for Buhler Versatile Row Crop Steer-Ready (MY2015 & Newer)
FIGURE 9. Master Switch in Enclosure
2. Install the master switch in a convenient location using either self-tapping screws or double sided tape (not
provided).
3. Locate the 4-pin connector on the cab harness (P/N 115-4010-127) labeled “Steering Lockout Switch” and
connect it to the master switch.
INSTALL THE VALVE HARNESS
FIGURE 10. Valve Harness Secured to Bulkhead
1. Connect the round 21-pin connector on the valve harness (P/N 115-4001-159) to the mating bulkhead
connector under the machine cab.
2. Route the valve harness toward the existing valve located under the cab near the right wheel.
