PAGE 19/37 | Calibration manual | 016-8000-015EN | Rev. A1
CALIBRATE SC1 | CRX + SC1 AUTOSTEERING | RAVEN EUROPE GENERIC
53
This is the main menu of the UT from the
ISO Raven Steering Controller.
54
When pressing the ‘steering wheel’ button
at the top, information for the steering
status is shown. All statuses must be green
except the Resume Switch Status.
When pressing the Remote Go button (if
attached) this one should blink green.
55
When pressing the ‘GPS button’ at the top,
information for the GPS is shown. The status
must be converged. The Current Accuracy is
the relative accuracy, which means accuracy
after one day. Pass to pass accuracy is not
shown.
56
Press ‘Settings’
The Profile name is now standard on Front
Steered Tractor.
The name of this Profile can be changed to
the right name by pressing on ‘Change
Profile’.
