PAGE 15/37 | Calibration manual | 016-8000-015EN | Rev. A1
CALIBRATE SC1 | CRX + SC1 AUTOSTEERING | RAVEN EUROPE GENERIC
When a complete Raven Europe
Autosteering system is installed, a ‘Pressure
Transducer (4 – 20 mA)’ is mounted.
Select this transducer in the dropdown list.
Make sure this Disengage type is selected.
Select the ‘
Next
’
arrow.
The screen as in the right figure appears.
After pressing the button, The Disengage
pressure is being calibrated. Make sure the
machine is on a flat surface and wheels can
move without causing damage.
Press the ‘Start’ button
The disengage sensor is being calibrated.
Follow the instructions on the screen.
The first few seconds, ‘do not touch the
steering wheel’!
