3
• Route cables to prevent tripping hazards and to keep wires from pinching or
breaking.
• When temperatures are expected to be 10° F (-12° C) or lower, remove the
console from the vehicle and store it in a climate controlled environment.
• Even when powered down, the Cruizer console will draw a small amount of
power from the vehicle battery. If the machine will not be in operation for an
extended period of time, disconnect the power cable from the back of the
console.
Installation
1. Mount the antenna on the centerline of the tallest point of the vehicle
(usually on the top of the cab) using the magnetic mount. Make sure that
the antenna has a clear, 360° view of the sky. If the mounting location is not
metallic, use a mounting plate (supplied with helix style antenna) to mount
the antenna.
2. Route the antenna cable to the back of the Cruizer console and connect it
to the antenna port.
3. Connect the power cable to the power port on the Cruizer and plug the
adaptor into the vehicle accessory port or cigarette lighter socket.
4. Using the RAM mount arm, mount the Cruizer inside the cab to a clean
surface.
For additional cabling and connection assistance, see the
section on page 22 Additional diagrams are available on the Raven
Precision Solutions website:
http://www.ravenprecision.com/Support/ApplicationDrawings.
Warning:
Do not cut off accessory plug or modify the power cable
in any way. The accessory plug offers fuse protection.
Modification of any of the supplied parts could result in
injury or death.
Note: Throughout the manual certain words are either in
blue
or
bolded
. The
blue
words are section headings. Refer to those
sections for more information. The
bolded
words are names of
Cruizer icons.
