1 7
Display
During a job, the built-in light bar indicates the distance and direction to the
current guidance path.
1. From the
, select:
.
2. Select the
Day
or
Night
mode for the
display.
3. Use the
Lights
and
Screen
sliders to adjust the brightness of the touch
screen and built-in light bar LED’s.
4. Adjust the Light Bar slider in the lower section of the Display screen to set
the light bar sensitivity. Select one of the following available sensitivities:
• Fine
• Medium
• Coarse
The lower-center
green
LED illuminates when receiving a DGPS signal.
The upper-center
green
LED illuminates when guidance is in progress and
the vehicle is on the currently displayed guidance path. See the
section on page 6 to begin guidance.
If an optional SmarTrax system has been installed, the outside
orange
LEDs
will illuminate when the SmarTrax system is engaged.
