5
Transport Mode Switch Functions
Note:
The implement proximity switch installed with the OmniRow system will
override the section and master switches when the implement is raised to
transport height.
1 - Fold Switch.
(Only functional in transport mode) Use the Fold switch to fold or
unfold the implement. Toggle the switch up to fold the implement or down to unfold
the implement.
Note:
Operation of this switch requires the implement to be raised to at least the
high field limit position before folding the implement in.
2 - Wing Wheel Switch.
(Only functional in transport mode) Use the Wing Wheel
switch to raise or lower the wing wheels.
3 - Latch Switch.
(Only functional in transport mode) Use the Latch switch to lock
or unlock the wing folding functions if equipped on the implement during
transportation.
4 - Tool Bar Raise/Lower Switch.
In transport mode, the Tool Bar switch will only
actuate the implement valves while the switch is held. Hold the Tool Bar switch in
the up position to raise the implement or in the down position to lower the
implement.
Plant Mode Switch Functions
1 - Marker Mode Switch.
Toggle the marker mode to select the left marker, right
marker, or automatic marker control modes.
Select the left or right marker to manually raise or lower the left or right marker
using the marker function switch.
Set the marker mode switch to automatic (AUTO) to control each marker in
sequence during an active job.
Note:
The automatic marker mode will only function while in an active job on the
field computer. If the field computer is not in an active job, toggling the
switch to the up position will raise both markers simultaneously. The down
position will not function outside of an active job with the Marker Mode
switch set to automatic.
1
2
3
4
1
2
7
6
5
4
3
8
