Raven AccuFlow Vortex, Installation And Operation Manual

Page: 29 / 98

AccuFlow™ Vortex and AccuFlow™ HP+ Installation: One Inch Gauge Tree and Valve Assembly 25
ACCUFLOW™ VORTEX AND ACCUFLOW™ HP+ INSTALLATION
ONE INCH GAUGE TREE AND VALVE ASSEMBLY
GAUGE TREE AND VALVE ASSEMBLY
FIGURE 11. Gauge Tree and Valve Assembly
1. Apply PTFE thread sealant to all threaded joints.
2. Install the threaded end of the Gruvlok into the side of the fitting tee.
3. Install 1-1/2” x 1/4” reducer into one end of the fitting tee.
4. Install 1/4” branch tee into 1-1/2” x 1/4” reducer.
5. Install a needle valve into the 1/4” branch tee.
6. Install a reducer into the remaining available port on the fitting tee.
7. Install the long pipe nipple into the reducer.
8. Install the other end of the 1-1/4” x 4” long pipe nipple into 1-1/4” cross.
9. Install the 1-1/4” x 3” pipe nipple into one of the side ports on 1-1/4” cross.
10. Install a 1-1/4” x 1/2” reducer into the other side of the 1-1/4” cross.
11. Install the pressure gauge assembly into the top of 1-1/4” cross.
12. Thread a pipe adapter onto the other end of the 1-1/4” x 3” pipe nipple.
13. Install the control valve into the pipe adapter.
14. Install a 1” relief valve adapter and 1” close pipe nipple into the other end of the control valve.
Hose Barb
Fitting
Reducer
Fitting Tee
1-1/4” x 4”
Pipe Nipple
On/Off Valve
Control Valve
Pressure
Gauge
1/4” Run Tee
Needle Valve
Pipe Nipple
1” Close
Nipple
Fitting Tee
Gruvlok Pipe
Nipple
1/4” Branch
Tee
1-1/2” x 1/4”
Reducer
Elbow
1-1/4”
Cross
Relief Valve
1-1/4” x 1/2”
Reducer
Pipe Adapter
Pipe Adapter
1-1/4” x 1/2”
Reducer
1/4” Pipe Plug
(for optional
pressure
transducer)
1/2” Pipe Plug
(for optional
temperature
transducer)
1” Relief Valve
Adapter
Bleed Valve
Relief Valve
1-1/4” x 3”
Pipe Nipple
1/4” Branch
Tee
1-1/4” x 1/2”
Reducer