IP Deskset 47816A-700/710 Manual
V A.1.0
1 |
P a g e
Table of Contents
1
Web Configuration Initial Setup ………………………………………………………………………………………………….1
2
Tab Directory ……………………………………………………………………………………………………………………………..2
3
Calls ……………………………………………………………………………………………………………………………………………3
4
Directory …………………………………………………………………………………………………………………………………….4
5
Accounts …………………………………………………………………………………………………………………………………….5
6
Audio ………………………………………………………………………………………………………………………………………….6
7
Network ……………………………………………………………………………………………………………………………………..7
8
System ……………………………………………………………………………………………………………………………………….8
9
Management ……………………………………………………………………………………………………………………………..9
10
IP Deskset Controls ……………………………………………………………………………………………………………………10
Web Configuration Initial Setup
1.1
After unboxing the contents plug the AC adapter into a 110VAC outlet.
1.2
Connect the AC adapter to the receptacle on the rear of the chassis.
1.3
Connect an Ethernet cable (not provided) from the receptacle on the rear of the chassis to either a
network switch or directly into the NIC port of a computer.
1.4
The computer that is being used to program must be on the same subnet as the IP Deskset. To
change a computers network settings will vary depending on the version of the OS. Below are links
for both Microsoft and Apple computers to assist in changing network settings. The IP Deskset
comes from the factory with the address of 10.1.1.253 and a subnet of 255.255.255.0.
1.5
Open a browser and type 10.1.1.253 in the navigation bar and the authentication screen should pop
up.
1.6
The default credentials for the user name is admin and, the password is also admin.
https://support.microsoft.com/en-us/help/15089/windows-change-tcp-ip-settings
https://support.apple.com/kb/PH21579?locale=en_US
