User manual MIA 90
Page109
Vers. 1 du 20/10/16
EN
This type of installation (See Figure 1) requires the chimney to
be insulated despite the fact that the entire duct is
installed inside the building. Moreover, the structure should be
inserted into a properly
ventilated skylight well.
At the bottom of the chimney is provided an inspection cover
suitably isolated from wind and rain.
It is not recommended to install a 90° curve as the first section,
since the ash could quickly obstruct the smoke passage,
compromising the draught. (See Fig. 2)
This type of installation (See Fig. 3) does not
require insulated flue for the section
inside the building, while the section located outside of the
building should be made of insulated tubes. The lower part
of the flue has an assembled “T” joint with an inspection
plug.
In this way you can inspect the outer section.
Examples of installation of a pellet cooker
IT IS MANDATORY TO USE WATERTIGHT PIPES WITH SILICONE SEALS.
Protection contre la pluie
Im.1
Grille pour passage de l'air dans
le vide technique avec ouverture
pour inspection du carneau
Vide
technique
Raccord en T pour condensation
Carneau calorifugé
Canal pour fumée :
utilisation de tube
non calorifugé
Raccord en T
Carneau calorifugé
Fig.3
Protection contre la pluie
Chambre de collecte des
cendres de combustion
+ bouchon de
condensation
Fig.2
Cenere depositata nella
curva a 90°
NO
Summary of Contents for MIA 90
Page 1: ...MANUALE UTENTE MIA 90 MANUEL DE L UTILISATEUR MIA 90 USER MANUAL MIA 90...
Page 49: ...DATA INTERVENTO EFFETTUATO MANUTENZIONE...
Page 95: ...DATE INTERVENTION FFECTU E ENTRETIEN...
Page 96: ...Stove model Stove serial number Date of installation Support reference data Telephone number...
