Use and maintenance manual for stoves with RDS technology
Pag.25
Rev.0 05/12/2022
Set of the working power
To modify the working power press key 2 to enter in the dedicated menu and with keys 1 and 2 to set the power you desire from 1 to
5 and confirm with key OK. Increasing the power also the pellet consumption and the speed of the fan increase as well.
OPERATING PHASES OF THE APPLIANCE
Sequence of ignition phases
During the ignition phase, the following indications will appear on the display:
•
IGNITION: loading phase of the pellets in the fire pot and heating of the ignition electrode (variable waiting time according to the
factory parameters)
•
WAITING FLAME: flame ignition waiting phase (variable waiting time depending on the factory parameters)
•
FLAME LIGHT: phase of development and stabilization of combustion (waiting time varies depending on the factory parameters)
•
WORK: normal operating mode, according to the chosen settings
If the ignition command is given when the stove is still hot, i.e. in FINAL CLEANING, the stove will remain in the WAITING RESTART
phase for a few minutes, after which it will automatically re-ignite (IGNITION RESTART).
Modulation
During the work phase, the appliance should reach the room temperature set; when this condition is met, the stove switches to
MODULATION mode in which fuel consumption is minimum.
Description of menu functions
To access the menu from the “Home” screen, press the OK button (short press).
To scroll the menu list, use buttons 1 and 2 and then confirm with OK to enter the submenus.
Then, to return to the “Home” screen, press keys 1 and 2 at the same time. To return to the previous menu, press OK (long press).
The stove is equipped with many functions available in each menu programming. Some of these menu are accessible for the end user ,
other are protected with a password so they are accessible only for the After sales center.
• Menu USER
• Menu SET RDS
• Menu DEFAULT SETTINGS
• Menu
STANDARD PARAMETERS
📌
The SET RDS, DEFAULT SETTINGS, and STANDARD PARAMETERS menus are password protected. Changing parame
-
ters within these menus could compromise the operation and safety of the stove. In this case the warranty will be invalidated.
