RE / DD / UM / 2508 V1.2- 01
35
4.2
Programming:
The
MENU
key is used to enter into the programming mode
for changing the zone details and other settings. The various steps
involved in this menu are shown as flow chart 4.1. After entering
into the menu, screen will be as below,
4.2.1.
Program
NOTE: Access to programming is possible only by Admin
password (Default Password – 56789).
By selecting the number 2 from the menu screen, system
enters into the program mode. The Zone mode, Output
program, Features, and settings configurations are done in this
program mode. After entering the program mode, screen will
be as below.
4.2.1.1.
Zone Mode:
By selecting the number 1 from the program screen,
system enters into the zone mode. In this mode the zone
mode can be changed to supervisory, fire, walktest and
disable mode. After entering the zone mode, screen will be
as below.
1. Suppressed Events
2. Program
3. History
4. About
1. Zone Mode
2. Feature
3. Setting
Zno: 1 2 3 4 5 6 7 8
Mde: Y Y Y Y Y Y Y Y
Zone X
Y Mode
Summary of Contents for RE-2504
