11
10
HEATED PRODUCT WARNINGS AND SAFEGUARDS
Please read the product label and all of the instructions
before using your heated product. As with all electrical
products, misuse of your heated product and/or
failure to properly follow the instructions may cause
overheating, fire, personal injury, or death.
INSTRUCTIONS FOR USE
1. If you have a medical condition which makes you
sensitive to overheating or you use any personal
medical devices, ask your physician to determine if
use of this product is appropriate.
DO NOT use your heated product on:
• An infant or young child
• An incapacitated or immobile person
• A paraplegic or quadriplegic
• A diabetic
• Anyone insensitive to heat, such as a person with
poor blood circulation
• Anyone who cannot clearly understand the
instructions and/or operate controls
2.
DO NOT use if inner liner is wet. Water will increase
the risk of electric shock.
3.
DO NOT abuse the power cable. Never use the cord
for carrying, pulling, or unplugging the heated
jacket. Keep cord away from heat, oil, sharp edges,
or moving parts.
4.
DO NOT use the heated jacket if the power indicator
button on the battery isn’t working.
5. DO NOT allow heating elements to touch bare skin.
6. DO NOT allow the cords to be pinched.
7.
DO NOT use pins. They may damage the electric wiring.
8. If the heated jacket turns off unexpectedly, check
connections and make sure your battery pack is charged.
9.
SHUT OFF power immediately if any discomfort occurs.
10. ALWAYS REMOVE BATTERY PACK before changing
or removing accessories. Only use accessories
specifically recommended for this jacket. Others may
be hazardous. For a complete listing of accessories for
your Ravean jacket go online to ravean.com.
11. If the heated jacket does not start or operate
properly with a fully charged battery pack, clean the
contacts on the battery pack. If the heated jacket
still does not work properly, contact Ravean at
12. NEVER disassemble the heated jacket, battery,
or charger.
13. Your jacket may be safely used at temperatures
between 4°F and 140°F (-20°C and 60°C).
Use the heated jacket in accordance with these
instructions, taking into account the working conditions
and the work to be performed. Use of the heated jacket
for operations different from those intended could
result in a hazardous situation.
BATTERY WARNINGS AND SAFEGUARDS
Rechargeable lithium-ion batteries are potentially
hazardous and can present a serious FIRE HAZARD if
damaged, defective, or improperly used.
1.
DO NOT try to heat the product and charge the
battery at the same time.
2. DO NOT charge battery inside battery pocket.
3. DO NOT try to disassemble or cut battery.
4.
DO NOT expose to high heat or direct sunlight for
long periods of time.
5. DO NOT burn or incinerate battery.
6. DO NOT use if battery case is cracked or damaged.
7. DO NOT use if there is leakage or case bulges.
8.
DO NOT use battery with any non-Ravean 12v chargers.
9. DO NOT expose battery to any type of liquid.
10. DO NOT charge at temperatures below 40°F (4°C).
11. DO NOT store at temperatures higher than 170°F (76°C).
This can potentially result in self-combustion.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, seek medical
help. Liquid ejected from the battery may cause irritation
or burns. If you see your heated product or battery is
operating improperly, unplug it immediately and contact
Ravean at [email protected]
HEATED JACKET STORAGE AND CARE
1.
Disconnect the battery pack from the heated jacket
before storing. This prevents you from accidentally
turning on the jacket.
2. Batteries should be stored at temperatures between 40°F
and 80°F (4°C and 27°C) for maximum life and safety.
3. For maximum life, batteries should be stored at
40% to 70% charge.
4. Batteries in long-term storage at room temperature
should receive a charge every three months or so.
5.
DO NOT leave the battery in the jacket overnight or
while not in use.
6. Maintain heated jacket. Check for breakage of parts
and any other condition that may affect the heated
jacket’s operation. If damaged, contact Ravean at
[email protected].
7. Recharge only with the Ravean charger. A charger that
is suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
8. Use heated jacket only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
9. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
10. Before washing, disconnect and remove battery
pack from jacket. Push the power cord completely
into the battery pocket and fasten closed.
11. NEVER immerse your battery holder, battery pack, or
charger in liquid or allow any liquid to flow inside them.
12. Maintain labels; they carry important information.
If labels are unreadable or missing, contact Ravean
for free replacement.
CHARGING INSTRUCTIONS
The following recommendations, in addition to the
precautions above, should be followed when charging
lithium-ion batteries to ensure the avoidance of
potentially catastrophic fire or explosion.
1. Charging should be performed in a firesafe area,
away from children or pets. NEVER charge batteries
unattended, for longer than 3-hours, or where objects
such as carpet, furniture, wood or vinyl floors, curtains,
or other flammable objects are present.
2. Charging should be performed at a temperature
between 40°F and 110°F (4°C and 43°C). Never
charge below 40°F (4°C).
1. USB POWER CORD
2. MOBILE DEVICE
3. HAND POCKET
4. MEDIA HOLE
1. BATTERY POCKET
2. USB OUTPUT
3. BATTERY POCKET MEDIA HOLE
4. CORD CHANNEL
5. HAND POCKET MEDIA HOLE
RAVEAN
12V MOBILE CHARGING
1
3
4
5
2
1
3
4
1
2
2
STEP 1
Plug your mobile device's
USB power cord into your
mobile device. Then, thread
the USB cord through the
media hole found inside the
jacket pocket.
STEP 2
Feed the USB cable through
cord channel inside the jacket
and into the media hole on the
battery pocket. Plug the USB
cord into the USB output on the
battery. Replace the battery
into the battery pocket.
