6
Do not use if your hill or lakeshore does not meet these
requirements.
Place deflated slide sections on the shore or similar firm surface with
sufficient clearance to inflate and transport the inflated section to the
location you intend to use it. Make sure the area is free of all sharp
sticks, rocks or other objects that could puncture the product.
Step 2: Inflate
To inflate, use either the RAVE High
Speed Inflator (#01083) or the RAVE
120v Canister Inflator (#02342).
Locate the valves on each side rail of
the slide straight sections. Inflate
bladder 50% full and check to ensure
bladder is not twisted and valve is
properly aligned with the hole in the
cover. Adjust the bladder if necessary.
Inflate side rails to firm but not hard. Inflating the product too firm
initially can make it difficult to join the sections together. Assemble
slide with sections partially full and top off inflation pressure in side rail
tubes once entire slide is set up.
A special inflation adaptor (included with the
High Speed Inflator) is needed for the
Inflatable Start Ramps. Simply lock the
adaptor onto the end of the inflation hose
and insert into the valve body. Turn ¼ turn to
lock in place.
NOTE:
This inflation adaptor will automatically open the valve
when inserted and will close the valve when removed. You do
not need to manually open/close the valve when using this
special adaptor.