Note: To avoid damaging the rooster tail device:
•
Do not drag the product on the ground.
•
Do not store product in excessively hot area.
•
Do not tow or sit in the product while it is in contact with the
ground.
•
Avoid extreme shallow water starts as the weight of the rider(s)
can depress the rooster tail device into the lake bottom causing
damage during takeoff.
Troubleshooting
Air chamber(s) won’t hold air:
•
Check stem valves to ensure plugs are fully seated down into
the valve body.
•
Check main Boston valve to ensure plastic ring is not caught
under the seal or cap.
•
Check for holes in bladder following the procedures in the
“Repair” section.
Cleaning and Storage
When the inflatable product is not being used, we recommend
that you store it in a covered, shaded area. This will help protect
it against ultraviolet (UV) rays and extend the life of the product.
Clean the inflatable completely with a mild soap and fresh
water. NEVER USE PETROLEUM BASED PRODUCTS OR SOLVENTS
FOR CLEANING.
Product should be completely dry and remain dry while stored.
Replace the insert into the rooster tail device.
Roll the product loosely and place in a vented storage bag or
container.
Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.
