Secure the product to prevent unauthorized or unsupervised
use.
Repairs
For Minor Holes or Tears:
Remove the inner bladder from the cover.
Inflate the tube and locate the leak by spraying the tube with
soapy water. Bubbles will appear where there is a leak.
Determine the hole size and cut a circular patch ½ - 1 inch wider
than the hole.
Remove air from the tube and dry tube completely where the
patch is to be applied.
Peel off paper back from patch, apply repair patch to area and
work out any air bubbles from beneath the patch.
Apply weight to the patched area for one hour before re-
inflating.
Put the bladder back into the cover.
NOTE: Ensure the outer edge seam of the bladder is aligned with
the cover seam and is spread out evenly within the cover. A
misaligned cover can cause distortion and less than optimal
performance of the tube and rooster tail.
For Other Repairs:
If the tip of the rooster tail device becomes bent, apply medium
heat with a hot air gun or blow dryer and restore the shape.
Install the fiberboard insert that came with the device. Let cool.