INSTALLATION MANUAL
–
RCS
Hy-Q-52
24
5.7 Change unit label
1
1
2
Select ‘unit label’.
The overload setting determines when the
load bar in the display shows overload.
Go to ‘weigher / settings’ and select overload.
Enter your truck’s capacity here.
You can find it on the trucks load diagram.
Note:
The calibration value does not change accordingly. For lb to be displayed you need to
perform a new calibration.
5.8 Set the overload value
Note:
If the option ‘overload buzzer’ is included in the system, this setting is also the set point
for the buzzer.
2
Choose your preference
kg or lb and press ‘enter’.
