background image

Disposal information for countries outside the European Union

This symbol is only valid within the European Union. Follow local 

regulations when disposing used batteries. If you are not sure, 

consult the place of purchase or a RAVAS dealer.

Nominal voltage / capacity

BA-3.7V-5.2A: 5.2 Ah

Operating temperature range

During use: -10°C 

-

  +50°C

During charging: 0°C  -  +40°C

Specifications

• 

Normal charging

 

- Charging takes up to 6-7 hours for a full charge (a partially discharged battery will be 

fully charged sooner). 

- When the battery is fully charged, charger stops automatically. 

- After charging, the battery should be taken out of the charger. 

• 

Storing the battery 

- When the weighing system is not used for a longer period, make sure the battery has 

approximately 70% of the battery capacity remaining. Take care not to let the battery 

become completely empty by charging it every 6 months. 

- Store the battery separated from the weighing system in an indoor place 

(approx. +10°C - +20°C) where it is not exposed to direct sunlight or rain. 

• 

Battery life

 

The battery is a consumable item. The battery will gradually lose its capacity for charging 

after repeated use and after time has passed. If the operating time that the battery can be 

used becomes shorter and shorter, it has probably reached the end of its life.  

Note: For replacement or additional battery pack, contact your distributor. 

• 

About used batteries

 

Lithium ion batteries are recyclable, valuable resources. For recycling of broken or used 

batteries, follow the local guidelines in your country. If you are not sure, please send back 

to the distributor for proper way of recycling.

Operation

      
     

USER MANUAL

 –

 

i

Forks-52 (BLE) 

6

Summary of Contents for iForks-52










































Reviews: