20
TIMER button until its LED goes out and "00" appears on the display.
Delayed switch-off
The device can be programmed to switch off after the specific time has elapsed - delayed switch-off. Press
TIMER in the work mode. The time left before the device is switched off
is displayed. By pressing the button once you can increase the time left to switch-off by 1 h.
To cancel the timer setting, switch the air-conditioner off manually by pressing POWER or keep pressing the
TIMER button until its LED goes out and "00" appears on the display.
SLEEP button
- (PM-9000 –„FAN+UP”) sleep mode - only in the COOLING mode
Press SLEEP - the fan is set to slow speed.
When the SLEEP function is on in the cooling mode, the temperature will increase by 1 degree after 1st hour of
device operation and by another 1 degree after 2nd hour. After that the temperature will not change.
PLEASE NOTE!
To protect the compressor against excessive switching on and off, the device was designed so as the
compressor switches on after at least 3-minute break if the device has been switched off and/or any function
was changed too soon.
VIII. TO EMPTY WATER TANK - "W.F." LED ON THE CONTROL PANEL
If the control lamp ("W.F.") of the water tank overflow is on, empty the tank.
PLEASE NOTE!
Unplug the device before you empty the tank.
Always empty the tank when the air-conditioner is no longer used, regardless of how much water is there.
TO EMPTY THE TANK
1.
Switch the air-conditioner off. Unplug it.
2.
Put an appropriate container on the floor under the drain hole (9).
PLEASE NOTE!
Use the container only while emptying the tank. Water should not run into the container when the air-
conditioner is on as this can lead to overflowing.
1.
Twist off the plug (10).
2.
Remove the rubber stopper and drain water from the device.
3.
Put the rubber stopper in again. The water tank overflow indicator (W.F.) should go out.
4.
Tighten the plug.
The air-conditioner should switch off automatically when the water tank is full.
Cleaning and maintenance
Before you start cleaning, switch the air-conditioner off and unplug it.
Use soft damp (not wet) cloth with mild detergent. Do not use solvents, petrol or other and other measures
that would damage the device.
TO CLEAN THE FILTER
The filter should be cleaned every two weeks. Dirty filters reduce the air-conditioner efficiency.
For this purpose, pull out the upper and lower filter from the device.
1.
Clean the filter with a vacuum cleaner.
2.
Wash the filter with a running water with a mild detergent.
3.
Rinse thoroughly.
4.
Dry the filter before you re-assembly it.
X. TRANSPORT AND STORAGE
Always empty the water tank before you store and transport the device.
Before putting the device away, wait until it cools down. Keep and store in a package protecting from humidity
and mechanical damages.
Transport in the original packaging, protecting against mechanical damage and dirt.
