Ventilating your room
Press MODE button repeatedly until the LED of FAN operation lights up.
In ventilation mode the room air is circulated, but not cooled.
Press FAN button repeatedly to select the fan speed as desired
Dehumidifying your room
Press DEHUM button or mode button on the remote control, the LED of DEHUM operation
lights up. The fan speed is unable to select. User should connect the hose to the drain outlet
at the bottom of the unit. The drain hose is needed as well as in heat operation mode.
Note: in this mode, the fan speed switches over to low speed and cannot be selected.
Sleep mode
The sleep mode can be activated when in cool mode and heat mode.
Protection function
Frost Protection Function:
In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust
pipe is too low, the machine will automatically enter protection status; if the temperature of
the exhaust pipe rises to a certain temperature, it can automatically revert to normal operation.
Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound
an alarm, and the "FULL" indicator light will flash. At this point, you need to move the drainage
pipe connecting the machine or the water outlet to sewer or other drainage area to empty the
water (details see Drainage Instructions at the end of this chapter). After the water is emptied,
the machine will automatically return to the original state.
Automatic Defrosting
(cooling models have this function): The machine has automatic
defrosting function.Defrosting can be achieved through four - way valve reversing.
Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
Drainage
Unscrew the drainage cover and unplug the water plug, the water will automatically flow into
the water container.
