16
TRANSPORT AND STORAGE
The precautions to be taken when storing the appliance
Before storage or transport disconnect the cooker from the gas source (gas cylinder).
Transport and store in the original packaging, protecting against dust, humidity, and mechanical damages.
Store In a dry and clean place, out of reach of children.
The cylinder must be stored in a well-ventilated place out of reach of children.
The disconnected cylinder must possess protections on the threaded connections and valve and cannot be
stored in the garage or another confined space.
Do not store the LPG cylinder in below-grade rooms,
in multi-floor buildings and houses or in places without
the sufficient ventilation.
INSTALLATIONS
Remove the packaging and place the cooker in a dry place, far from any flammable items. Do not store any
paper, alcohol, petrol etc. near the cooker.
The cooker is designated for gas supply with the parameters specified on the rating plate.
Before connecting, check if the type of gas on the cylinder and on the device rating plate are compatible.
The cooker is equipped with the stub pipe K. You can connect gas hose to the stub using the appropriate
fixtures.
Connect the cooker to LPG cylinder. The device can be supplied with gas in family 3: 3B/P – propane butane.
To connect the gas, use a pressure reducing valve with the rated gas pressure of 37 mbar.
Before you start connecting the gas source, the gas knobs should be closed.
This device cannot be adapted to use with other gas types.
Connection by means of flexible hose
PLEASE NOTE!
Connection by a flexible hose can be made only after checking if this is compliant with the applicable
regulations.
Periodically check the hose. Replaced the hose as specified by its manufacturer.
Liquefied gas connection (propane-butane)
Use a certified rubber hose to connect the device to the cylinder.
The hose length cannot be more than 1.5 m without any folds or twists.
The hose cannot go close to sharp edges or objects with sharp ends.
The hose should not be laid near sources of high temperature.
The hose must be accessible to enable inspecting for any wear or tear all along.
Use the cooker with a 12 kg cylinder
The correct way to connect the gas hose is shown in Fig. V
1.
- Gas connection stub pipe
2.
- Clamp
3.
- Gas supply hose
