SERVICE
MANUAL
RAVAGLIOLI S.p.A.
RAVTD5040WD / 5060WD / 5080WD
RAVTD5080WS - RAVTD1760WS/1780WS
RAVTD1850WS - RAVTD2200WS
Code R0184 - rev.1.2
(01/2011)
Ravaglioli S.p.A. -
Via I° Maggio, n° 3 (Frazione di Pontecchio Marconi)
Page 19/22
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 e-mail: [email protected]
3.2 Caster
compensation
procedure
The first option of the calibration menu
(see Figure 28), is used in order to
adjust the caster angles readings
caused by eventual “out of level” of the
vehicle in longitudinal direction. This
could happens, for example, when the
lift groove of the turntables, have a
differently height than the turntables
height.
It is necessary set, simply by the key F2
and F3, the difference between the front
wheel height and the rear wheel height
(see Figure 33).
The system will automatically adjust the
caster reading, considering this
difference relating it with a standard
wheel base of the vehicle.
Figure 33
3.3 Steering
Self
calibration procedure
If the measuring heads are not perfectly
calibrated could happen that after the
adjustment of the vehicle, on the road, it
will result with the steering wheel not in
the straight position. The second option
of the calibration menu (see Figure 28),
is used in order to adjust the position of
the steering wheel. It is necessary set,
simply by the key F2 and F3, the
position how become actually the
steering wheel (see Figure 34).
The system automatically adjust the
reading values in order to obtain a
position straight of the steering wheel.
Figure 34
