SERVICE
MANUAL
RAVAGLIOLI S.p.A.
RAVTD5040WD / 5060WD / 5080WD
RAVTD5080WS - RAVTD1760WS/1780WS
RAVTD1850WS - RAVTD2200WS
Code R0184 - rev.1.2
(01/2011)
Ravaglioli S.p.A. -
Via I° Maggio, n° 3 (Frazione di Pontecchio Marconi)
Page 5/22
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 e-mail: [email protected]
Figure 7
To run the NORMAL (Not DEMO) Aligner program it is also necessary to copy manually the
system configuration and the Smart Card certificate:
- Copy manually the “config” file
Config_S9RAV001000011.enc
from the folder \AS9 to
C:\TMLAB\ALIGNERS9\System\
-
Copy also the “security” files
Token_S9RAV001000011_975e932f39184095922af79ec1c1ed6b.enc
and
X509_S9RAV001000011.cer
from the folder \AS9 to C:\TMLAB\ALIGNERS9\Security\
Note: the above filenames are for examples,
S9RAV001000011 is
the serial number of the smart card
where the file is linked. This files are unique and is not possible to copy in another PC for unlock the SW or
the Data Bank.
Figure 8
Attention: Before run the Aligner Program it is necessary to reboot again the PC.
Then will be necessary in the Aligner program, to set the configuration options and set
the Bluetooth or Serial connections. See for details next chapters.
press “Finish”
serial number of
the Smart Card
