INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 27 of 60
14.2.2 Programs setting through “Measure-
ment being acquired” screen page
From the “Home” page, press the
(
Fig. 35
ref. 1
) button to display the "Measurement being ac-
quired" screen below:
- Press the button
to display the following pro-
grams selection screen page:
P R E S S T H E B U T T O N
(
Fig. 35 ref. 1
)
TO DISABLE AU-
TOMATIC FUNCTION OF THE
DISTANCE-DIAMETER CALIPER
ARM WHEEL BALANCING SELEC-
TION, DESCRIBED IN PAR. 14.2.1.
TO BE ABLE TO REUSE THE
AUTOMATIC FUNCTION TO SE-
LECT THE WHEEL BALANCING
PROGRAM WITH GAUGE ARM, IT
IS NECESSARY TO RETURN TO
"HOME" PAGE, BY PRESSING THE
BUTTON
.
The selection of the wheel balancing program is pos-
sible in 2 ways:
- with highlighted program (blue colour) by pressing the
or
until you see the desired program.
With this mode only the 11 standard programs can
be selected (DYN, ALU-S, ALU-S1, ALU-S2, STAT,
STAT-1, STAT-2, ALU-1, ALU-2, ALU-3, ALU-4).
IF THE PROGRAM NAME IS NOT
HIGHLIGHTED (BLUE), PRESS
THE BUTTON
REPEATEDLY
UNTIL THE ABOVE CONDITION IS
REACHED.
Use the arrows
and/or
to select the
wished mode (blue). In this mode you can select the
11 standard programs (listed above) and special
programs (PAX360, PAX420, PAX460, PAX700).
AFTER YOU HAVE SELECTED THE
DESIRED PROGRAM, USE THE
DISTANCE-DIAMETER CALIPER
AND/OR THE EXTERNAL DATA
GAUGE (GAR306 OR GAR304) (IF
ANY) TO DETECT THE MEASURES
REQUIRED BY THE PROGRAM.
WHENEVER THE DISTANCE-DI-
AMETER CALIPER AND/OR THE
EXTERNAL DATA GAUGE (GAR306
OR GAR304, SEE FIG. 39) (IF ANY)
IS KEPT IN POSITION FOR A FEW
SECONDS AGAINST THE RIM
(UNTIL THE MACHINE MAKES AN
APPROPRIATE SOUND NOTIFICA-
TION), THE POSITION IS STORED
AND THE VALUES MEASURED IN
THE PRE-ARRANGED FIELDS IN
THE SELECTED WHEEL BALANC-
ING PROGRAM ARE LOADED.
- After entering all the required measures, you can spin
the wheel by pressing the button
and closing
the protective guard.
1297-M007-1_R
G3.140R - GP3.140R - G3.140RS - GP3.140RS
RAVAGLIOLI S.p.A.
