Rauch QUANTRON-A AXIS-M 20 EMC, Instruction Manual

Page: 2 / 116

Preface
Dear Customer
By purchasing the
control unit QUANTRON-A for the AXIS and MDS fertiliser spreader, you have
shown confidence in our product. Thank you very much! We would like to justify this confidence.
You have purchased a reliable, high-performance
control unit . If, contrary to expectations, any
problems occur: Our customer services are always there for you.
Please read this operator’s manual as well as the fertiliser spreader’s operator’s manual
carefully before commissioning, and follow the advice given.
This operating manual explains
in detail how to operate the spreader and contains important information on operation, care and
maintenance.
This manual may also describe equipment that is not included in your control unit.
Please note that damage caused by incorrect operation or improper use may not be covered by
warranty claims.
Technical improvements
We are continuously improving our products. Therefore, we reserve the right to make any
improvements and changes to our machine that we consider necessary without notice.
This constitutes no obligation to make such improvements or changes on machines that
have already been sold.
We will be pleased to answer any other questions that you might have.
Yours sincerely
RAUCH
Landmaschinenfabrik GmbH
NOTE
Note the serial number of the control unit and of the machine.
The control unit QUANTRON-A is factory-calibrated for the fertiliser spreader with which it has
been delivered. It cannot be connected to another fertiliser spreader without requiring additional
calibration.
Please state this information when ordering spare parts or accessories, and in case of com-
plaints.
Type Serial number Manufacturing year