Safety
3
8
3.4.3
Accident prevention
Safety and accident prevention regulations are governed by law in every country.
The operator of the machine shall be responsible for the compliance with these
regulations applicable in the country of use.
The following instructions must also be observed:
Never let the machine run without supervision.
Do not ride on the machine while it is working or being transported (
no pas-
sengers
).
Do
not
use machine parts as climbing aids.
Always wear tight fitting clothes. Do not wear work clothes with belts, loose
threads or other items that could snag.
Follow the manufacturer's warning notes when handling chemicals. You may
have to wear personal protective equipment (PPE).
3.5
Information on operational safety
To avoid dangerous situations, only use the machine in a reliable condition.
3.5.1
Lifting and moving the machine
The machine is delivered ex factory in a cardboard box standing on a pallet.
Only lift the machine at the pallet using a suitable pallet truck or forklift. Take
the total weight into consideration.
Never lift or move the machine at the hopper or at other, non-marked anchor
points.
3.5.2
Parking the machine
Only park the machine with the hopper empty and on horizontal, solid ground.
Open the metering slide completely when you park the machine.
3.5.3
Filling the machine
Use a shovel or a bucket for filling.
Fill the machine no higher than the top-edge. Observe the maximum admis-
sible payload.
Summary of Contents for K 51
