Connecting rod
Measuring inner diameter of small end
If it is below the criterion or exceeds the
maintenance limit, replace the connecting rod.
Standard
Use limit
See Table 1-3
See Table 1-3
Test the I.D. of the big end
If it is below the criterion or exceeds the
maintenance limit, replace the connecting rod.
Standard
Use limit
See Table 1-3
See Table 1-3
Connecting rod cover
Align connecting rod with the edge of the
connecting rod cover when installing.
Big end clearance of oil film
Wipe oil off surfaces of crankshaft pin and
connecting rod bearing.
Set a plastic feeler gauge outside the
crankshaft pin, to mount the connecting rod, and
tighten the bolt to specified torque.
Torque: RS100: 8±1 N.m
Alignmen
t mark
Connecting rod bolt