16
5 Setting up the device
5.3
Securing the device
For safety reasons, tabletop units should only be
placed atop a manufacturer-original oven stand
or base unit. Maximum working height for the
topmost rack is 1600 mm.
Unit size 60
These units do not have height-adjustable feet;
instead, they are set up directly on the installati-
on surface.
The installation surface must be level, clean and
free of grease. Unevenness across the width of
the device must be no greater than 1 mm.
A sealant band is affixed to the underside of the
device to seal the installation site. This prevents
dirt from getting underneath the device. When
moving the device, take care not to damage this
seal.
Mounting onto an oven stand:
> Insert the two included neoprene blind rivet
nuts into the holes in the rear part of the
underbody.
> Place the unit onto the oven stand.
> Secure in place using the screws provided.
